The SerialGhost is a compact RS-232 and serial bus logger with 8GB of memory. It can acquire data from a single serial data source, or tap onto a bi-directional serial bus. The SerialGhost can operate as USB flash memory for easy access to logged data.
The SerialGhost is a compact asynchronous serial logger, capable of recording RS-232 data streams from devices like printers, terminals, keyboards, mice, barcode scanners etc. Connect the device either to a single serial source, or in-line on a serial bus. Connect 5V DC power using the side USB-B connector. The SerialGhost will immediately start logging all data available on the bus, both upstream and downstream (RX and TX). No software or drivers are required.
To view the recorded data, the SerialGhost may be switched to flash drive mode. Connect to a computer using a USB-B cable, press the side button, and the SerialGhost will pop up as a removable drive, containing a file with logged data. The flash drive may also be used to configure the device, such as baudrate, parity bits, start/stop bits, etc.