The AirDrive Keyboard and Mouse Jiggler is a small and discreet multifunction USB device, capable of acting as a USB mouse and keyboard simultaneously. It features 3 different jiggler modes, preventing the screen-saver from activating and the computer from going to sleep. It also features 3 different prank modes, by simulating random keystrokes and mouse moves. Works out-of-the-box, does not require any software, compatible with all operating systems and USB 3.0. Programmable with a single button and multi-color LED.
The AirDrive Mouse Jiggler is a simple solution to a bunch of annoying problems: screen-saver going off every few minutes, computer going to sleep or standby mode, and communicator icons turning idle after a period of inactivity. In some cases these annoying features can be disabled by operating system configuration. But if you''re working on a system with a corporate or administrator IT policy, your options are limited. A mouse jiggler (sometimes called a mouse mover) is by far the easiest and fastest solution to this problem.
The AirDrive Keyboard and Mouse Jiggler acts as a USB mouse and USB keyboard composite device and periodically generates an small cursor movement or keystroke. This movement is unnoticeable to the human eye, but enough to trick the operating system into thinking the user is active. It has a set of modes and frequencies programmable with a push button and multi-color LED.
The mouse jiggler is a USB Human Interface Device (HID), therefore does not require any drivers or software, and works on any operating system including Windows, Mac OS, and all flavors of Linux. It's compatible with all USB standards, including USB 3.0.
Mouse jigglers play an important role during raids conducted by law enforcement. They keep the seized equipment alive during transportation by preventing password screens and disk encryption software to activate. This allows to immediately examine and secure the captured data.
The AirDrive Keyboard and Mouse Jiggler is a more sophisticated version of the standard jiggler. It is programmable with a simple push-button and can act as a USB mouse and keyboard simultaneously. It features 6 modes, covering typical jiggler functionality and a few prank modes. It features a multi-color LED indicating the selected mode and frequency of events.
The programming scheme shows an overview of how to program the device using the push-button. A long-press will start the programming cycle, and switch from mode to interval. A short press will cycle between specific modes (indicated by the LED color), and intervals (indicated by the number of blinks).
The mode reference table shows an overview of modes and event intervals, which can be programmed using the push button. During programming, the mode is indicated by the LED color, while the number of blinks indicates the event interval.