The AirDrive RS-232 Recorder is a compact RS-232 and serial bus logger with 4 gigabytes of built-in memory. It can acquire data from a single serial data source, or tap onto a bi-directional serial bus. The AirDrive RS-232 Recorder can operate as USB flash memory for easy access to logged data. It''s packed with features such as dual port configuration or virtual COM port mode with data streaming and a proprietary command set.
$82.99 / €75.99
Manufacturer product number:
Gross weight (inc. packaging):
0.1kg / 0.2 lbs
Size (inc. connectors):
61mm x 31mm x 19mm
The AirDrive RS-232 Recorder is a compact asynchronous serial logger, capable of recording RS-232 data streams from devices like printers, GPS receivers, terminals, keyboards, mice, barcode scanners etc. Connect the device either to a single serial source, or in-line on a serial bus. Connect 5V DC power using the side USB-B connector. The AirDrive RS-232 Recorder will immediately start logging all data available on the bus, both upstream and downstream (RX and TX). No software or drivers are required.
To view the recorded data, the AirDrive RS-232 Recorder may be switched to flash drive mode. Connect to a computer using a USB-B cable, press the side button, and the AirDrive RS-232 Recorder will pop up as a removable drive, containing a file with logged data. The flash drive may also be used to configure the device, such as baudrate, parity bits, start/stop bits, etc.
The AirDrive RS-232 Recorder family of devices has two RS-232 input ports, responsible for data acquisition from up to two sources. Both ports can share a common configuration, or may be configured independently using dual port mode. In this mode two separate settings may be used for the baud rate, number of bits, stop bits, and parity.
The AirDrive RS-232 Recorder family is packed with features, such as the capability to act as a USB removable flash drive, or USB Virtual COM port. In flash drive mode, a log file is available with all acquired data. Virtual COM port mode can be used to live-stream the captured data, or to communicate with the device using a proprietary command set.