Our RV electronics project is picking up pace. Four VW Crafters have been contracted, with the first one already renovated, painted (Porsche "slate gray") and ready for customization. Parallel to that, our new assembly facility is almost finished. The electronics as a stand-alone module will be available for sales early 2022.
Our RV electronics project is picking up pace. Four VW Crafters have been contracted, with the first one already renovated, painted (Porsche "slate gray") and ready for customization. Parallel to that, our new assembly facility is almost finished. Electronics in sales early 2022. pic.twitter.com/fFun5VjwI1
— KeeLog (@AirDriveWiFi) November 12, 2021
Our RV control electronics has passed the testing phase - 10,000km driven with two test vehicles: Mercedes Sprinter L4H2, and a VW Crafter L2H2
Our new integrated controller can manage lighting, photovoltaics, battery charging, water flow and levels, sensors, diesel heaters and more. This is intended as a single-board solution for RVs, campers, mobile homes and boats. Access to the control electronics is available through WiFi utilizing a web interface. That means you can visualize and control what's happening with your vehicle from any tablet, smartphone or laptop through an intuitive WWW interface.
Our RV control electronics has passed the testing phase - 10,000km driven with two test vehicles: Mercedes Sprinter L4H2, and a VW Crafter L2H2.
— KeeLog (@AirDriveWiFi) November 11, 2021
Our new integrated controller can manage lighting, photovoltaics, battery charging, water flow/levels, sensors, diesel heaters and more pic.twitter.com/BJQ5fwdmpw
Our new Sinclair QL line of power supplies is finally available in retails sales. It generates +9V DC and 15.6V AC with a 3-pin specialized QL-compatible custom-made plug. Anti-ripple filter, over-voltage and over-current protection, fused on AC and DC side and fully isolated. A version with the digital OLED display and touch sensor is also available. Four power plug options: US/CAN, EU, UK, AU/NZ
https://www.keelog.com/power-supply/#sinclairql
Our new Sinclair QL line of power supplies is finally available in retails sales. It generates +9V DC and 15.6V AC with a 3-pin specialized QL-compatible custom-made plug. Anti-ripple filter, over-voltage and over-current protectionhttps://t.co/4cmZQkmhb9 pic.twitter.com/pPEWpP59El
— KeeLog (@AirDriveWiFi) November 11, 2021
Following up the new Sinclair series, we also have a new Commodore Plus/4 power supply family available. A direct successor to the C64 PSU and C128 PSU lines, this Commodore Plus 4 has all the features of the predecessors:
Following up the new Sinclair series, we also have a new Commodore Plus/4 power supply family available. A direct successor to the C64 PSU and C128 PSU lines, this Commodore Plus 4 has all the features of the predecessors https://t.co/BImesNuhTj pic.twitter.com/xnf76qQRCH
— KeeLog (@AirDriveWiFi) November 11, 2021
TI-99/4A power supply now available! This PSU delivers +12V/+5V/-5V, replacing the internal AC PSU board. It has a plug compatible with the original TI-99/4A socket (common with ColecoVision). As with our other retro power supplies, an OLED + touch sensor version is available, as well as an entry-level PMMA LED-illuminated version. Available in gray and black high-quality ABS enclosures. Whichever version you chose, it will be a great addition to your TI-99 system.
Important information: this PSU replaces the internal AC power supply board. A modification to the system is required, to bypass the built-in AC board.
TI-99/4A power supply now available! This PSU delivers +12V/+5V/-5V, replacing the internal AC PSU board. It has a plug compatible with the original TI-99/4A socket (common with ColecoVision). As with our other retro power supplies, an OLED + touch sensor version is available. pic.twitter.com/gaVQDyEvc6
— KeeLog (@AirDriveWiFi) November 11, 2021
New ColecoVision replacement power supply, with a variety of features:
New ColecoVision replacement power supply, with a variety of features:
— KeeLog (@AirDriveWiFi) November 11, 2021
* Stabilized +5V/4.0A, +12V/2.0A, and -5V/0.5A DC
* Over-current protection
* Fused on AC and DC side and fully isolated
* On/off AC switch on rear side
* High quality ABS chassis pic.twitter.com/NQLiHmzowy
Keelog is entering a new market - control electronics for recreational vehicles. We have created an integrated controller that can manage lighting, photovoltaics, battery charging, water flow and levels, sensors, diesel heaters and more. This is intended as a single-board solution for RVs, campers, mobile homes and boats. Access to the control electronics is available through WiFi utilizing a web interface. That means you can visualize and control what's happening with your vehicle from any tablet, smartphone or laptop through an intuitive WWW interface.
For testing purposes we have built from scratch two test vehicles, a Mercedes Sprinter L4H2, and a VW Crafter L2H2. Both vehicles have been equipped as full-fledged camper-vans, with beds, shower units, rotary seats, kitchen unit, cabinets/drawers/shelves, PV panels, additional batteries, water and gas systems, and of course our centralized control unit. Both vehicles are currently out on tours throughout Europe on a set of tests. After testing, our electronics, accessories, and vehicles assembled by us will be available for sales.
Keelog is entering a new market - control electronics for recreational vehicles. We have created an integrated controller that can manage lighting, photovoltaics, battery charging, water flow and levels, sensors, diesel heaters and more. pic.twitter.com/2YSg0mlGSh
— KeeLog (@AirDriveWiFi) July 21, 2021
Our first Sinclair QL power supply unit has just been shipped for testing. It generates 16V AC and +9V DC. The biggest challenge was to create a compatible Sinclair QL plug. The plan is to release a few versions of this power supply (gray, black, OLED digital + touch screen), as well as a power supply tester for the Sinclair QL. Please contact us directly with your remarks and suggestions.
www.keelog.com/power-supply
Our first Sinclair QL power supply unit has just been shipped for testing. It generates 16V AC and +9V DC. The plan is to release a few versions of this power supply (gray, black, OLED digital + touch screen). #sinclairql #sinclairhttps://t.co/N86jrvvhXD pic.twitter.com/GPvsi2BqtK
— KeeLog (@AirDriveWiFi) July 21, 2021
Our new Commodore Plus/4 adapters now available on www.keelog.com and Ebay. Convert C128 and C64 power supply pinout to the Plus/4 standard.
Read more here:
https://www.keelog.com/c64-plus-4-psu-adapter-commodore-64-to-plus-4-power-supply-adapter-cable/
https://www.keelog.com/c128-plus-4-psu-adapter-commodore-128-to-plus-4-power-supply-adapter-cable/
Our new Commodore Plus/4 adapters now available on https://t.co/0H9HqXRlOE and Ebay. Convert C128 and C64 power supply pinout to the Plus/4 standard.
— KeeLog (@AirDriveWiFi) July 21, 2021
Read more here:https://t.co/KaiYushWhehttps://t.co/sxvmjwW5Mj pic.twitter.com/VURO69RInt
Our new AirDrive Mouse Jiggler Gold is out. This is a heavily miniaturized version of our standard jiggler, feature-wise it's the same though. It's nice and small, doesn't stick out from the USB port. We have reinvented the production process of this device, to make sure we can distribute it cheap, and in high numbers.
https://www.keelog.com/mouse-mover/
Our new AirDrive Mouse Jiggler Gold is out. This is a miniaturized version of our standard jiggler. It's nice and small, doesn't stick out from the USB port. We have made sure we can distribute it cheap, and in high numbers.https://t.co/GXWSIVCBS8 pic.twitter.com/K5XL50ssJ1
— KeeLog (@AirDriveWiFi) February 14, 2021