Power supply for Commodore 64, Commodore 128, Amiga 500 and more
High-quality replacement PSU for C64
Reliable C128 power supply for years to come
Full-featured Amiga 500 PSU optimized for size and performance
Multiple enclosure sizes and colors, LED illumination
Over-voltage protection, anti-ripple filter, fused on AC and DC side
Power supply failures are among the most common problems among all retro computer systems. Our power supply tester series for Commodore C64, C128, Amiga 500/500+/600/1200, Atari XL/XE, and ZX Spectrum +2A/+2B/+3 was created specifically to address this issue. Diagnosing a PSU failure can prevent expensive repairs or even save your hardware from a total damage. The power supply tester runs an automatic yet thorough test, measuring currents, voltages, and even voltage ripple.
| C64 | C128 | C64 FDD Dual | Amiga | Atari | ZX Spectrum | |
|---|---|---|---|---|---|---|
| Supported systems | C64, VIC-20 | C128 | C64, VIC-20, FDD 1541-II | Amiga 500/500+/600/1200 | Atari XL/XE | ZX Spectrum +2A, +2B, +3 |
| Plug type | DIN7 round female | DIN5 square female | DIN7 round female DIN4 round female |
DIN5 square female | DIN7 round female | DIN6 round female |
| OLED digital display | ||||||
| Heat sink | ||||||
| +5V DC load test (400mA...500mA) |
||||||
| +9V AC load test (50mA...150mA) |
- | - | - | |||
| +12V DC load test (50mA...150mA) |
- | - | - | |||
| -12V DC load test (50mA...150mA) |
- | - | - | - | ||
| Abmessungen | 50mm x 30mm x 25mm (2.0" x 1.2" x 1.0") |
50mm x 30mm x 25mm (2.0" x 1.2" x 1.0") |
50mm x 30mm x 25mm (2.0" x 1.2" x 1.0") |
50mm x 30mm x 25mm (2.0" x 1.2" x 1.0") |
50mm x 30mm x 25mm (2.0" x 1.2" x 1.0") |
50mm x 30mm x 25mm (2.0" x 1.2" x 1.0") |
| Preis und Verfügbarkeit | C64 PSU Tester  $24.99 / €20.99 |
C128 PSU Tester  $24.99 / €20.99 |
C64 FDD Dual PSU Tester  $29.99 / €25.99 |
Amiga 500 PSU Tester  $24.99 / €20.99 |
Atari XL/XE PSU Tester  $24.99 / €20.99 |
ZX Spectrum PSU Tester  $24.99 / €20.99 |
Angebot für B2B und Großhandel.
Für weitere Informationen klicken Sie bitte die folgenden Links:
Power supply failures are among the most common problems among all retro computer systems. Our power supply tester series for Commodore C64, C128, Amiga 500/500+/600/1200, Atari XL/XE, and ZX Spectrum +2A/+2B/+3 was created specifically to address this issue. Diagnosing a PSU failure can prevent expensive repairs or even save your hardware from a total damage. The power supply tester runs an automatic yet thorough test, measuring currents, voltages, and even voltage ripple.
The C64 PSU tester measures the primary +5V DC output voltage and ripple at a constant current of roughly 400mA...500mA. Secondary voltages (9V AC or +/-12V DC depending on the model) are measured at a lower current, typically 50...150mA. Measurement results are updated on a digital OLED display in real-time, allowing a live evaluation of the power quality.
The power supply tester has an aluminum heat-sink allowing to dissipate excessive power and perform long-term testing. It's designed to work both as a quick diagnostic tool, and for long-term stability tests.
Our power supply testers are a perfect match for our retro C64, C128, Amiga, Atari and ZX Spectrum power supply series. Our C64 PSU and Amiga PSU design are well established architectures, produced and sold in hundreds of units monthly. Both series are designed to be mutually complementary.
