The MorphStick Keyboard Multilogger is a multiple channel keyboard recorder. It can monitor 2 USB keyboard lines in tap mode, and actively poll an additional keyboard in USB host mode. Captured data may be stored to internal flash memory or streamed in real-time over local USB or Ethernet to any chosen IP address. An additional built-in USB hub simplifies the setup and reduces the amount of cabling. The MorphStick Keyboard Multilogger does not interfere with keyboard operation, and does not require any drivers or software.
The MorphStick Keyboard Multilogger Max is an enhanced version, that can monitor 4 USB keyboard lines in tap mode, and actively poll an additional keyboard in USB host mode. Besides all the features of the MorphStick Keyboard Multilogger, it also contains a built-in Real-Time Clock (RTC) with a battery, and an external serial command interface.
MorphStick Keyboard Multilogger:
MorphStick Keyboard Multilogger Max:
MorphStick Keyboard Multilogger | MorphStick Keyboard Multilogger Max | ||
---|---|---|---|
Input channels in tap mode | 2 | 4 | |
Input channels in host mode | 1 | 1 | |
Output | Built-in flash, local USB data stream, or Ethernet data stream | Built-in flash, local USB data stream, or Ethernet data stream | |
Power source | USB (+5V) External PSU (+9V...+24V) |
USB (+5V) External PSU (+9V...+24V) |
|
Built-in flash storage | 16GB built-in flash | 16GB built-in flash | |
Registro de tiempo y fecha | Software (NTP or user set) Optional: Built-in RTC + battery |
Built-in RTC + battery Software (NTP or user set) |
|
Built-in USB hub | Yes | Yes | |
External command interface with RS232 connector | - | Yes | |
Dimensions | 78 mm x 120 mm x 30 mm (3.1" x 4.7" x 1.2") |
103 mm x 120 mm x 34 mm (4.2" x 4.7" x 1.3") |
|
Pricing and availability | MorphStick Keyboard Multilogger $293.99 / €267.99 |
MorphStick Keyboard Multilogger Max $343.99 / €312.99 |
For more information visit the following links:
The MorphStick Keyboard Multilogger is a powerful, yet simple to use data converter and logger. Connect multiple USB keyboards or barcode readers to the front panel dual USB-A sockets. Each may have a separate USB connection to the host computer, or the integrated USB hub may be enabled, reducing the number of cables. An additional USB keyboard or barcode reader may be connected to the host port on the rear panel. This device will be polled by the MorphStick Keyboard Multilogger, with no connection to the computer necessary. Depending on the configuration, acquired data may be logged to the internal flash memory, sent through the local USB connection, or transferred over Ethernet to a chosen destination.
The MorphStick Keyboard Multilogger Max is an enhanced version, that can monitor 4 USB keyboard lines in tap mode, and actively poll an additional keyboard in USB host mode. Besides all the features of the MorphStick Keyboard Multilogger, it also contains a built-in Real-Time Clock (RTC) with a battery, and an external serial command interface.
All MorphStick devices feature a button, which switches them into configuration mode over USB. An free lightweight application is available, which guides through the configuration process. During configuration the basic network communication needs to be configured, such as the where to send the acquired data. It takes just a few minutes to get the basic data transfer running, however the flexibility of the device also allows setting up sophisticated communication schemes.
The MorphStick Keyboard Multilogger features two or four USB ports working in tap mode, and one USB port working in host mode. The Tap port works like a keylogger, capturing existing communication between the USB keyboard or barcode reader, and the computer. The Host port contains a built-in USB controller, which actively polls the keyboard or barcode reader for data. Data originating from all ports is later treated the same way during recording to flash memory, or transferring over USB or Ethernet.
The MorphStick Keyboard Multilogger handles USB power and data flow in a configurable way. Each port has its own power management circuit, protecting the connected devices. USB keyboards and barcode readers can either be connected directly to the host computer using the dual USB-A sockets, or through an integrated USB hub. This reduces the amount of cables, and helps avoid ground loops in a complicated multiple-device setup.
Morphsticks are essentially building blocks of bigger communication systems. The data originating from MorphStick Keyboard Multilogger can be sent to several destinations. One of them can be the MorphStick Ethernet 2 Keyboard, creating a transfer link over Ethernet for keyboards and barcode readers. Another destination can be a host computer, with dedicated software. A sample application is delivered, demonstrating this capability. Yet another option is a dedicated MorphStick device solely for the purpose of logging data from several sources. The MorphStick Keyboard Multilogger can also be used as an embedded data server, with the capability to retrieve logged data on demand, both locally over USB, and remotely over Ethernet.
The MorphStick Keyboard Multilogger Max has an integrated RTC (Real-Time Clock), enabling time-stamping while logging data. The set time and date is retained even when the device is powered off, thanks to an internal battery.
The MorphStick Keyboard Multilogger Max features an additional serial connection with a standard DB-9 socket, enabling external control of the device. All vital features of the device are controllable through a simple set of serial commands.
|
|
|
|
|
|
|
|
No devices available, please change criteria | MorphStick Keyboard Tap 2 Ethernet $198.99 / €180.99 |
MorphStick Keyboard Tap 2 Ethernet PoE $298.99 / €271.99 |
MorphStick Keyboard Tap 2 Ethernet Max $223.99 / €203.99 |
MorphStick Keyboard Host 2 Ethernet $198.99 / €180.99 |
MorphStick Keyboard Host 2 Ethernet PoE $298.99 / €271.99 |
MorphStick Keyboard Host 2 Ethernet Max $223.99 / €203.99 |
MorphStick Ethernet 2 Keyboard $198.99 / €180.99 |
MorphStick Ethernet 2 Keyboard PoE $298.99 / €271.99 |
MorphStick Keyboard Multilogger $293.99 / €267.99 |
MorphStick Keyboard Multilogger Max $343.99 / €312.99 |
MorphStick Serial 2 Ethernet $198.99 / €180.99 |
MorphStick Serial 2 Ethernet PoE $298.99 / €271.99 |
MorphStick Serial 2 Ethernet Max $223.99 / €203.99 |
MorphStick Ethernet 2 Serial $198.99 / €180.99 |
MorphStick Ethernet 2 Serial PoE $298.99 / €271.99 |