The MorphStick Serial 2 Ethernet is a compact network device, capable of converting serial data to Ethernet packets. It taps onto a serial or RS-232 connection, captures the transmitted data frames, and sends them as UDP datagrams in a user configurable format.
The MorphStick Ethernet 2 Serial works in the opposite direction, generating serial data from incoming UDP data over Ethernet. The source of the UDP data can be a MorphStick Serial 2 Ethernet, or data generated from a network device or computer.
MorphStick Serial 2 Ethernet:
MorphStick Ethernet 2 Serial:
Power-over-Ethernet (PoE) version:
MorphStick Serial 2 Ethernet | MorphStick Ethernet 2 Serial | |
---|---|---|
Input | Serial/RS-232 data stream | Ethernet data stream o USB data stream |
Output | Ethernet data stream o USB data stream |
Serial/RS-232 data stream |
Power source | USB (+5V) Power-over-Ethernet (PoE) version: PoE (up to +48V) |
|
Local flash storage | Max version: 16GB built-in flash | |
Registro de tiempo y fecha | Software (NTP or user set) Max version: Built-in RTC + battery |
|
Dimensions | 90 mm x 35 mm x 25 mm (3.5" x 1.3" x 1.0") |
|
Pricing and availability | MorphStick Serial 2 Ethernet $198.99 / €180.99 |
MorphStick Ethernet 2 Serial $198.99 / €180.99 |
MorphStick Serial 2 Ethernet PoE $298.99 / €271.99 |
MorphStick Ethernet 2 Serial PoE $298.99 / €271.99 |
|
MorphStick Serial 2 Ethernet Max $223.99 / €203.99 |
For more information visit the following links:
The MorphStick Serial 2 Ethernet is a powerful, yet simple to use data converter and logger. Connect a serial data source to the mini-DIN connector, using an adapter cable. Connect 5V DC power using the vertical USB-A socket (can be from any computer, using a standard USB cable). Connect Ethernet to the RJ45 socket on the other end. After a simple configuration procedure, the Morphstick will capture all serial traffic without interfering with it, and transfer it over Ethernet to a chosen destination.
The MorphStick Ethernet 2 Serial is a powerful, yet simple to use data converter and logger. Connect 5V DC power using the vertical USB-A socket (can be from any computer, using a standard USB cable). Connect Ethernet to the RJ45 socket on the other end. After a simple configuration procedure, the Morphstick will generate asynchronous serial data from data received over Ethernet.
All MorphStick devices feature a button, which switches them into configuration mode over USB. An free lightweight application is available, which guides through the configuration process. During configuration the basic network communication needs to be configured, such as the where to send the acquired data. It takes just a few minutes to get the basic data transfer running, however the flexibility of the device also allows setting up sophisticated communication schemes.
MorphStick Serial 2 Ethernet and MorphStick Ethernet 2 Serial feature a universal 6-pin mini-DIN connector, which can be used in a few different serial bus configurations. To connect to a single serial source, the mini-DIN to DB-9 adapter can be used, which is supplied with each device. To connect to a serial bus with two data transmitters and receivers, a special mini-DIN to DB-9 splitter cable can be supplied. Similarly, DB-25 adapters and male/female converters can be supplied with the device.
Morphsticks are essentially building blocks of bigger communication systems. The data originating from MorphStick Serial 2 Ethernet can be sent to several destinations. One of them can be the MorphStick Ethernet 2 Serial, creating a transfer link over Ethernet for serial devices. Another destination can be a host computer, with dedicated software. A sample application is delivered, demonstrating this capability. Yet another option is a dedicated MorphStick device solely for the purpose of logging data from several sources.
The PoE version allows to power the device with DC voltages up to 48V over the RJ-45 connector. The device can be powered either over USB or through PoE (or both), extending the flexibility of the application in which the MorphStick is used in. The PoE version fully supports IEEE 802.3af PoE specification, including PoE detection, classification and undervoltage lockout.
The Max version features high-capacity internal flash memory, and an RTC (Real Time Clock). The flash memory option adds 16GB internal memory for data logging purposes, while the RTC options adds time-stamps to the logged data. The set time and date is retained even when the device is powered off, thanks to an internal battery.
For more information visit the following links:
|
|
|
|
|
|
|
|
No devices available, please change criteria | MorphStick Keyboard Tap 2 Ethernet $198.99 / €180.99 |
MorphStick Keyboard Tap 2 Ethernet PoE $298.99 / €271.99 |
MorphStick Keyboard Tap 2 Ethernet Max $223.99 / €203.99 |
MorphStick Keyboard Host 2 Ethernet $198.99 / €180.99 |
MorphStick Keyboard Host 2 Ethernet PoE $298.99 / €271.99 |
MorphStick Keyboard Host 2 Ethernet Max $223.99 / €203.99 |
MorphStick Ethernet 2 Keyboard $198.99 / €180.99 |
MorphStick Ethernet 2 Keyboard PoE $298.99 / €271.99 |
MorphStick Keyboard Multilogger $293.99 / €267.99 |
MorphStick Keyboard Multilogger Max $343.99 / €312.99 |
MorphStick Serial 2 Ethernet $198.99 / €180.99 |
MorphStick Serial 2 Ethernet PoE $298.99 / €271.99 |
MorphStick Serial 2 Ethernet Max $223.99 / €203.99 |
MorphStick Ethernet 2 Serial $198.99 / €180.99 |
MorphStick Ethernet 2 Serial PoE $298.99 / €271.99 |