Clever converter for serial RS-232 devices

The MorphStick Serial 2 Ethernet is a compact network device, capable of converting serial data to Ethernet packets. It taps onto a serial or RS-232 connection, captures the transmitted data frames, and sends them as UDP datagrams in a user configurable format.

The MorphStick Ethernet 2 Serial works in the opposite direction, generating serial data from incoming UDP data over Ethernet. The source of the UDP data can be a MorphStick Serial 2 Ethernet, or data generated from a network device or computer.

Proprietà

• Two USB sockets and mini-DIN 6p connector
• Powered over USB or PoE (or both)
• Compact and portable design
• Highly configurable with simple PC-side application
• Durable anodized aluminum enclosure
• Mini-DIN 6p to DB-9F and DB-9M adapter cable included
• USB cable included

MorphStick Serial 2 Ethernet:

• Captures serial transmission up to 230400 bps
• Taps onto existing serial communication without interfering with it
• Sends data over Ethernet as UDP datagrams, or locally over USB
• Can be paired with MorphStick Ethernet 2 Serial

MorphStick Ethernet 2 Serial:

• Generates serial or RS232 data up to 230400 bps
• Receives data from UDP datagrams over Ethernet, or locally over USB
• Can be paired with MorphStick Serial 2 Ethernet

Power-over-Ethernet (PoE) version:

• Powered over USB or PoE (or both)
• PoE accepts +32V...+48V DC power (integrated step-down PSU)
• Fully supports IEEE 802.3af PoE specification
• Supports PoE detection, classification and undervoltage lockout

• 16 gigabyte di memoria incorporata
• Registrazione del tempo e della data
• Batteria incorporata

Product family overview

Per saperne di più

For more information visit the following links:

• MorphStick Serial 2 Ethernet
• MorphStick Serial 2 Ethernet PoE
• MorphStick Serial 2 Ethernet Max
• MorphStick Ethernet 2 Serial
• MorphStick Ethernet 2 Serial PoE
• MorphStick - Quick Start
• www.morphstick.com

How it works

MorphStick Serial 2 Ethernet

The MorphStick Serial 2 Ethernet is a powerful, yet simple to use data converter and logger. Connect a serial data source to the mini-DIN connector, using an adapter cable. Connect 5V DC power using the vertical USB-A socket (can be from any computer, using a standard USB cable). Connect Ethernet to the RJ45 socket on the other end. After a simple configuration procedure, the Morphstick will capture all serial traffic without interfering with it, and transfer it over Ethernet to a chosen destination.

MorphStick Ethernet 2 Serial

The MorphStick Ethernet 2 Serial is a powerful, yet simple to use data converter and logger. Connect 5V DC power using the vertical USB-A socket (can be from any computer, using a standard USB cable). Connect Ethernet to the RJ45 socket on the other end. After a simple configuration procedure, the Morphstick will generate asynchronous serial data from data received over Ethernet.

Highly configurable

All MorphStick devices feature a button, which switches them into configuration mode over USB. An free lightweight application is available, which guides through the configuration process. During configuration the basic network communication needs to be configured, such as the where to send the acquired data. It takes just a few minutes to get the basic data transfer running, however the flexibility of the device also allows setting up sophisticated communication schemes.

Serial adapter cables

MorphStick Serial 2 Ethernet and MorphStick Ethernet 2 Serial feature a universal 6-pin mini-DIN connector, which can be used in a few different serial bus configurations. To connect to a single serial source, the mini-DIN to DB-9 adapter can be used, which is supplied with each device. To connect to a serial bus with two data transmitters and receivers, a special mini-DIN to DB-9 splitter cable can be supplied. Similarly, DB-25 adapters and male/female converters can be supplied with the device.

The bigger picture

Morphsticks are essentially building blocks of bigger communication systems. The data originating from MorphStick Serial 2 Ethernet can be sent to several destinations. One of them can be the MorphStick Ethernet 2 Serial, creating a transfer link over Ethernet for serial devices. Another destination can be a host computer, with dedicated software. A sample application is delivered, demonstrating this capability. Yet another option is a dedicated MorphStick device solely for the purpose of logging data from several sources.

Power over Ethernet (PoE)

The PoE version allows to power the device with DC voltages up to 48V over the RJ-45 connector. The device can be powered either over USB or through PoE (or both), extending the flexibility of the application in which the MorphStick is used in. The PoE version fully supports IEEE 802.3af PoE specification, including PoE detection, classification and undervoltage lockout.

Internal memory and RTC

The Max version features high-capacity internal flash memory, and an RTC (Real Time Clock). The flash memory option adds 16GB internal memory for data logging purposes, while the RTC options adds time-stamps to the logged data. The set time and date is retained even when the device is powered off, thanks to an internal battery.

Per saperne di più

For more information visit the following links:

• MorphStick Serial 2 Ethernet
• MorphStick Serial 2 Ethernet PoE
• MorphStick Serial 2 Ethernet Max
• MorphStick Ethernet 2 Serial
• MorphStick Ethernet 2 Serial PoE
• MorphStick - Quick Start
• www.morphstick.com